Spray-Plast Systems

We have got three different spray-plaster systems available for interior building projects;

Spray on plaster systems on concrete.

Spray on plaster systems on plaster board.

Spray on plaster systems on block/brick.

Spray-Plast system on concrete ceiling

Spray-Plast systems are first and foremost a fast way of skimming walls and ceilings.

Spraying plaster is not only time effective but it will also provide a stronger finish.

Spraying on plasterboard

Plasterboard is a cost effective way of building interior walls. Plasterboard with a Spack Excellence plaster finish has a strong, long lasting durability. Ideal for staircases, lift lobby’s, corridors or rental properties.

System, spraying on new plasterboard:

  • Stop the joints to a level 4 finish with spack Excellence, no sanding needed.
  • Spray first coat (skim coat) with spack Excellence, trowel smooth with Spack knife.
  • Spray finishing coat with Spack Excellence to create a texture finish. Different decorative finishes can be created by changing the airpressure on the spray unit.
  • Ceilings will be troweled smooth with a ceiling spack-knife (pic below). No need for scaffold or ladders. A simple but very handy tool.

Above you can see a very time effective way to plaster ceilings. First the ceiling is sprayed with plaster and after that troweld smooth with this handy tool, no ladders or scaffold needed!!

After applying the first skim coat the plasterer has go back (when the plaster starts to set) to brush the corners with clean water, this is to make sure there is not to much plaster sitting in the corners, (prevent cracking) and to create sharp corners.

Spraying on smooth concrete

Apartments, and commercial buildings are often build out of large concrete panels. Interior smooth concrete is the preferred surface to spray on, as only minor stopping or preperation is required before spraying.

System, interior smooth concrete walls and ceilings:

  • Stop joints and holes with Spack Excellence (big holes mixed with trade set)
  • Spray first coat (skim coat) with spack Excellence, trowel smooth with Spack knife.
  • Spray finishing coat with Spack Excellence to create a texture finish. Spray-Plast can spray different decorative finishes by changing the airpressure on the spray unit.
Spray skim coat.
Trowel smooth with spackknife.

Smooth exterior concrete projects such as; Bridges, soundwalls and fences we finish with Spack Elegance.

System, smooth exterior concrete:

  • Stop joints and holes with Strikolith Mep-plus.
  • Spray first coat Spack Elegance, trowel smooth with Spack knife.
  • Spray finishing coat with Spack Elegance to create a texture finish.

Spraying on interior block/brick

In New Zealand these days more and more houses are being build out of block or bricks, or at least the first floor. With our block work plaster system the plasterer/ painter can finish interior walls in one go. No need for a drywall system (time, cost effective). Our system also works well on existing interior block work (pictures below)

System, interior block/brick walls:

  • Stop joints twice with spack Excellence.
  • Spray first coat (skim coat) with spack Excellence, trowel smooth with Spack knife.
  • Spray one coat with Spack Excellence to create a texture finish. Different decorative finishes can by created by changing the airpressure on the spray unit.

Spraying on exterior block/brick

A brick house or fence will have a remarkable make over with a quality plaster finish. Because of our spray-on system we can be very time efective.

System, exterior block/brick:

  • Plaster block-brick wall by hand or by machine with Strikolith MEP-plus.
  • Spray first coat with Spack Elegance, trowel smooth with Spack knife.
  • Spray one coat with Spack Elagance, to create a texture finish. Spray-Plast can spray different decorative finishes by changing the air pressure on the spray unit.

Elegance finishing plaster can also be sprayed on exterior wall-insulation systems, or can be used for property make overs when projects need a bit more than just paint.